Thursday, August 23, 2018

Building again

›
Guess what it is this time? Here is a pic of the start. A small house this time. That is the slab for it. 20 x 28 feet. It sat and cured...
Friday, January 19, 2018

RE

›
hey Don
Sunday, June 5, 2016

Hello Don

›
Hey Don http://oakland-first.com/progress.php?weight=1qeqc544mx9 donlittlefield
Saturday, July 13, 2013

Fw: Fwd: Profiling . . .

›
----- Forwarded Message ----- From: Richard McKay <richard.mckay@cox.net> To: mad.inc@att.net; Mike Wade <mwadesmail@gma...
Monday, November 12, 2012

Fwd: Don Hey!

›
check this out when you get a chance http://msnbc.msn.com-local6.us/jobs/
2 comments:
Thursday, April 7, 2011

Shade for the Fish Tank

›
I built this temporary shade for the tank  to help slow down the algae bloom.

fixing leaks

›
I had an idea about the dripping leaks when the system runs and quits and drains. I decided to add a 45 degree fitting in the drain to stop ...
1 comment:
Tuesday, April 5, 2011

Update today

›
This morning I decided to put a pressure control valve on the recycle line back into the Fish Tank and cut it back a little. Gives me more f...
1 comment:
Monday, April 4, 2011

Pumping Water Now

›
Now just look at all that water being circulated. Wow. I am happy and so sore I cant stand it. I set the timer for 30 on 30 off and went in ...
1 comment:

Spray Bar and piping to pump

›
Here we are seeing the Spray Bar and the pump Piping.

›
This is a shot of the North side of the barrels which will someday be the center aisle. See the drains.............

Spray bar and Gutters

›
In this shot I finished the gutters and the spray bar on top. I put in some blocks to hold the gutter up and put some screws in to hold the ...
Sunday, April 3, 2011

Drains and overflows

›
I have trouble getting the pictures in the right order so I will just do them one at a time. this one shows the beds with water in and runni...

More pics

›
Here is a shot of the Grow Beds from the far end from the tank. The beds closest to you need to be cleaned. They are full of sand. Forgot so...

More work on the AP Project

›
I nearly killed myself cleaning gravel for the Grow Beds. Got 9 clean and setup. I've got to make another trip to the PVC store so I can...
Wednesday, March 30, 2011

Fixing the rack problem

›
I noticed that the racks are starting to tilt in a bad way so I am going to fix that problem before it causes a disaster...
Tuesday, March 22, 2011

picture got lost

›
1 comment:

First rack finished

›
I finished the first rack and moved it to the garden area. I also put in the barrels. Hope to get gravel in them today and get the next rack...

Building the racks for the barrels

›
1 comment:
Sunday, March 13, 2011

Aquaponics progress

›
I have now gotten a pump and a float valve for the tank. Had kinda nice day so I dug the hole for the tank and put it in the hole. Little to...
Wednesday, March 9, 2011

Beggining My Aquaponic Garden

›
Here is the beginning of the new project. An Aqua Ponic Garden. This tank is 1100gallons and will be sunk into the ground so only about 5 or...
Friday, May 7, 2010

Got a Gravel driveway

›
A few days ago we had  some gravel hauled in for a driveway. We got tired of having to walk out when it rained. Works real good.
17 comments:
Sunday, January 3, 2010

Finished the outside

›
Ahh the last piece of trim and gutter was installed on the outside in this picture. Well almost. Need to put in a couple of pop rivits top h...
2 comments:
Tuesday, November 3, 2009

Doors

›
Here it with doors. Altho the insulation is not there yet. It looks better with doors. Should keep out the water and the bugs. Don Littlefield
1 comment:

Doors at last

›
Finally got the doors delivered and installed them. Had a minor problem with the installation of the doors. The instructions say to use a l...
Thursday, October 22, 2009

Building Electrical

›
Hello again. I have finished putting in the electrical and am still waiting on the doors. Now to be delivered on Tuesday. The gutters have b...
Tuesday, October 6, 2009

Electrical Stuff

›
Lee and I went to Home Depot and got the electrical parts for the building yesterday. Now we have to put it up so we can have lights and pow...
Sunday, September 27, 2009

Building update

›
I have ordered the rain gutters and downspouts to add to the building. I did not think about them when I first ordered the building. They wi...
Saturday, September 19, 2009

Door openers

›
This time I have installed the door openers. When the correct doors arrive I can hook them up. I cant run the wires to the safety switches y...
Thursday, September 10, 2009

›
Well here is a building without front doors. It is complete otherwise. Now we will have to do electrical. Need lights right. And work benche...

›
Here is the roof finished on the inside. I better do some catching up here. We have made progress in the last few days. I will add some pic...
Monday, August 31, 2009

›
We put up 3 sheets more now and one skylight row. will take a break for a couple of days. Going to take Lee to Doc appointment in Houston. S...
Sunday, August 30, 2009

›
As you can see the first row was installed and we got out the second one and rolled it out and found that it was cut short by 2 1/2 inches. ...
Saturday, August 29, 2009

4 walls up

›
Here we go. Nearly have completed the 4 walls here. They shorted me 4 pieces of trim for the top of the wall so can only do about a 1/3 of ...
Sunday, August 23, 2009

better pic

›
I did a little adjustment on this pic with photoshop. Lets see how it worked.
Saturday, August 22, 2009

›
Well here is the latest pic with two wall completed.
Thursday, August 20, 2009

Here is the back wall going up. Still is not finished.

›
Had to stop here for a rain. Sure slows down the progress And some more the next day. A few more sheets and some are even getting installed...

starting on insulatin and sheeting the outside

›
Hey look at that, Im driving the forklift instead of fixing it. Much better way to use this one. It is big and is hard to position real clos...
Saturday, August 15, 2009

Saterday IT is a week today

›
We started building the shop last Saturday and we finished the steel today, Saturday again. Will start the sheet metal this afternoon. Was l...
Wednesday, August 12, 2009

Tuesday at the shop

›
Well we had a little scare when we got up to find it rained all night. Was worried about the insulation getting wet. That is a bad no no. Tu...
Tuesday, August 11, 2009

More pics of the shop building

›
The steel is nearly done. The rafters are up and the pearlings are getting started. Now it started raining. I hope the insulation dont get t...